Medical Anti Bedsore Air Mattress Tubular Alternating Airflow Pressure Massage PVC Pad for elders Patients Home Hospital Bed
Description:
The traditionally accepted method of pressure sore control is to turn the client at regular intervals to observe the areas of risk regularly. The alternating air pressure medical bed mattress is intended to compliment this treatment, observation of the client and turning when necessary should still be considered as part of the treatment.
General:
• For patients who are likely to spend more than15 hours per day in bed. • For patients who are classed as medium to high risk of developing pressure ulcers.
Specification:
Power supply: AC 110V/220V; 50~60Hz Mattress Size: 200cm (L)*90cm(W) Air output:: 6-8 liter/min Tubular: 22 pcs inflatable air tubulars Pressure range: 20mmHg-110mmHg Power consumption: 20W Fuse: 1A Pump Size: 30cm(L) x24cm(W)x13cm(H) Mattress weight: 6kg Pump Weight: 2kg Certification: CE, FDA, ISO13485
Installation/ Use
1. Unroll the mattress. 2. Position it on the bed. 3. Secure it to the bed with the fixing straps. 4. Put the compressor (pump) on flat. 5. Connect the mattress feed pipes to the compressor (pump) connector by matching the appropriate outlets. 6. Connect the electrical power supply cable to the compressor (pump). 7. Guide it along the bed to the mattress plug socket and plug. 8. Press switch to turn on the compressor (pump). 9. Before positioning the patient onto the mattress, wait until the mattress has been fully inflated. 10. Select the pressure corresponding the patient’s morphology.
