6-channel output Multi-Functional TENS body Massager Bioelectronic Acupuncture Home Therapy Device Adjustable Pulse Width Massage
Features:
1. 6 output channels. It has the ability to massage any part of the body at the same time, saving time and effort, in one place.
2. 2 power supply modes, battery-powered and plug-in use.
3. 3 kinds of waveform therapy, simulated human massage.
4. The pulse width can be adjusted, and a variety of frequencies can be selected to find the gear that suits you.
5. Digital Timing
Packing Including:
1pcs Charger
1pcs Instriction Book
1pcs Main Engine
6pcs Electrode Pad
6pcs Electrode Line
12pcs Metal Electroacupuncture Clamps
Specification:
Product Name : Electronic Acupuncture Therapeutic Instrument DMZ
Volume : 240×177×64mm
Weight : 1.1kg
Output Voltage : No More Than 500V (Operating Load 250Ω)
Input Power : DC 9V is 0.8VA; AC / DC converter is 5VA
Effective Value of Maximum Output Current : No More Than 10mA
Rated Load Impedance of Electroacupuncture Apparatus :
A) the patch electrode is 5009;
B) the electrode clamp is 250 Ω.
Instructions:
1. Notes:
It is best to wipe the area to be treated with a hot towel or medical alcohol before use.
All intensity adjustment knobs must be set to 30 before turning on the output, otherwise the alarm prompt will not work.
2. Prepare:
Insert the output wire into the jack of the skin electrode; peel off the release paper from the skin electrode.
And paste it on the part to be treated, insert the other end of the electrode output wire into the output jack,
At the end of the treatment, unplug the output cord from the jack first, and then remove the skin electrode.
If electroacupuncture is used, insert the electrode output wire into the filiform needle electrode clip, and then insert the filiform needle electrode
Clip on the handle of acupuncture needles that have been acupuncture. The use of electroacupuncture must be done by a professional acupuncturist
Use, in strict accordance with the electro-acupuncture operating procedures.
3. Power on
Press the power switch until the power indicator lights up.
Check and adjust the six output intensity adjustment knobs, all to the left to zero (otherwise it will cause an alarm sound)
Select and press the button (continuous wave, intermittent wave, sparse and dense wave three modes).
4. Settings
Press the mode button to select three waveforms: continuous wave, intermittent wave and sparse and dense wave;
Timing time is 1-60min continuously adjustable, press the required treatment time adjustment button,
The treatment time of the device can be set.
The pulse frequency of the electro-acupuncture instrument is continuously adjustable from 1 to 99 Hz, and can be adjusted according to the required treatment frequency.
Press the button to set the frequency.
5. Shut down
Turn the intensity adjustment knob counterclockwise to turn off. Turn off the power switch of the instrument.
Remove the needle body or skin electrode and unplug the output electrode wire. Remove the external power supply.
