Feature:
1. Exquisite Appearance: Exquisite and simple white design is beautiful, with right size, suitable for both men and women.2. Convenient Adjustment: You can precise adjust the temperature and pressure to transfer cooling energy to the subcutaneous fat cells.
3. For Most Part: Machine can fit the selected position without pressure loss, especially suitable for slimming tummy, arms, thighs, shanks, lifting hips and other body part.
4. With High Efficiency: The instrument protects the skin from cooling energy while improving the effectiveness of the product, and has effects on imparting elasticity, nutrition, moisture, etc.
5. Body Shaping: By reducing the residual layer of local fat after weight loss, effectively adjust the contours of body parts and promote the balance of diet and exercise.
Specification:
Item Type: Fat Freezing Machine
Material: ABS
Power Supply Mode: Power Plug Use
Product Voltage: 100-240V
Product Power: 90W
Suitable Parts: Arms, abdomen, buttocks, legs
Applicable Group:
1. People who need to lose weight.
2. People who don't want to rely on hunger and diet to lose weight.
3. People who accumulate fat by sitting for long periods of time every day.
4. People who want to lose weight easily and conveniently;
5. People who have no leisure time to do sports.
6. People who worry about high visceral fat.
Advantages:
1. Portable and equipped with cooling function.
2. Can be applied to selected body parts.
3. It will not destroy the epidermis or other cells and tissues.
4. The fastest 3 weeks can see the effect.
5. The wire can be diversified.
6. Less pain and procedures, no downtime.
7. Body shaping glue and frozen film are safe and reliable.
8. The noise is minimized by air cooling.
How to Use:
1. Check the sensor cover and liquid filter cotton to make sure the yellow filter cotton is installed inside the sensor cover.
2. Equipment the body shaping glue and clamp the treat part silicone in the machine tightly to prevent air leakage.
3. Insert the freezing protective film.
(1. Take out a piece of freezing protective film from the bag, rub the essential oil of the freezing protective film onto the body shaping glue, and apply the remaining essential oil of the freezing protective film to the position to be treated.
2. Take out a piece of frozen film, put it on the host port, and then clamp into the two sides of the silicone and tighten it. Do not remove the body shaping glue from the freezing film, the center line of the freezing film and body shaping glue should be parallel.
3. It is necessary to press down both sides of the frozen film and stick them close to the body shaping gel to avoid the frozen film will leave stains on the skin.
4. Ensure that the frozen film is attached to the red sign on the frozen plate. )
4. Shoulder strap connection: Connecting the shoulder strap to the silver circle on the back of the instrument.
Package List:
1 x Storage Box
1 x Host
1 x Shoulder Strap
4 x Body Shaping Glues
10 x Sponges
1 Connector
1 Cable
1 x Manual
Note:
1. If the frozen film is not installed, the two sides of the body shaping glue must be stuck on the frozen film before use.2. During preparation, check whether the yellow filter cotton is wet. If it is wet, replace it.3. The frozen film is disposable.4. After using the instrument, it is necessary to keep the instrument clean and the plastic glue clean.5. After using, take out the frozen film, and then be sure to put the instrument upright (if not taken out the frozen film and put the instrument upside down, the essential oil of the frozen film will into the instrument, resulting in the malfunction of the instrument).6. May cause red spots, scars or rare air bubbles after operation.7. It can work continuously for 24 hours. The longer the working time, the better the cooling effect.8. One hour is recommended.9. No erect work.10. On the machine, A1 indicates that the cold film is not installed, A2 indicates that the yellow filter cotton is wet, A3 and A4 indicate that the temperature of the cold plate is too high.
Maybe you also like:
