product description:
1. The acupoint detection and treatment instrument can detect and treat acupoints.
2. There are manual and automatic acupoint exploration modes. In manual mode, you can choose: stimulation, ear, ear-gold, ear-silver, body.
Auto Mode:
1. In automatic mode, the internal and external sensors of the hand-held probe measure continuously.
2. The reference voltage changes automatically and is displayed by the bar readout of the display and the corresponding numbers.
3. Each sensitivity corresponds to a certain tone.
Manual mode:
1. In manual mode, the internal and external sensors of the hand-held probe measure continuously.
2. Change the reference voltage by +/- on the left side of the device console or +/- on the handheld probe, there are 16 sensitivities in total.
3. The bar readout and numbers at the bottom right of the display show the modified reference voltage. Each reference voltage value has a specific signal tone.
5. If the reference voltage value is lower than the measurement value of the internal and external sensors, the signal sound will stop.
Ear-gold/ear-silver detection:
1. When the gold point is detected, Go will appear on the display, the green LED on the handheld probe will light up, and the signal will continue.
2. When the silver hole is detected, Si will appear on the display, the yellow LED on the hand-held probe will light up, and the signal sound frequency is 2Hz.
3. When the golden points of the ear are modulated, only the golden points are detected and displayed, and when the silver points of the ear points are modulated, only the silver points are detected and displayed.
